Home » New Boats » Coaster » Coaster 650 Barracuda Pro

The Coaster 650 Barracuda PRO is an OPEN model; this means that it does not have a wall at the stern and prefers to favor fishing space.

The bow is wide and comfortable. Shorter than its elder brothers (JC650 & C22) it allows a wider passage in front of the console. Install the sunbathing extension and it will turn out to be a great area to relax during long stalling moments. 2 x rocket holders (optional) find space on the sides of the larger lid.

Under the bow sundeck you will find 2 x watertight lockers: the first for the anchor & chain and the second for oversized caught fish or  safety equipment.
In addition, a sealed locker with removable tub is created in the floor to provide extra space for smaller caught fish.

The console seat is comfortable and enveloping, ideal even when sailing with mildly rough seas. Under such seat, a multifunctional space composed of a VTR counter-molded tank gives an ideal storing space for materials or in optional version, a further live bait tank may be installed.

The T-Top in fiberglass and INOX, is anchored on the console and on the structural base on which the console rests. A windshield protects during navigation and installing the sliding plexiglass (optional) guarantees protection during navigation.
The console backrest opens with the appropriate key, to give access to the instrumentation and the batteries.

An extremely convenient option is also identified in the PVC side windows. Designed to be very protective, they are completed by the sliding plexiglass on the T-Top. Adjustable LED lights and navigation lights complete the T-Top. Pre wired in JokerBoat, it allows for the installation of a radar, beacon, solar panel and much more. Adding the instrument module to the T-Top doubles the space for the instrumentation.

Another interesting optional is found on the sides of the boat: the additional fishing rod platforms. These platforms are extremely comfortable for maximizing the rod holder space without having rods or lines in the the way of the deck passages. Glued to the tubes, they are virtually indestructible during fishing and can be placed where you want best.

The driving seat is comfortable and practical. Without side armrests or structural obstacles, it allows the angler to get behind the wheel with great speed.

Moreover, it allows the captain to drive on his feet thanks to a stainless steel mechanism which lifts it from its resting position.

Two lockers characterize this seat: the first one (as in the image), to place smaller objects, while the second one is much larger (obtained by lifting the lid on which the seat is installed). This locker could also contain a cockpit fridge.

The console is large and structured to optimize the instrumentation space. Two x 12′ screens can be installed together, one recessed and one with bracket. An electric pannel with over 20 functions is standard for this model.

The live bait tank is the main tank on the Barracuda. Accessible via a small top plexiglass cover or by raising the main cover, it is equipped with a recirculation pump and an electronic timer. With its applied cushion it also acts as a comfortable seat for a passenger.

The Coaster 650 Barracuda PRO is an OPEN model; this means that it does not have a wall at the stern and prefers to favor fishing space. A central locker (with keys) gives space for storing rods or other materials that you want to keep safe. The internal space is over 1.8m in length.

The sides are equipped with removable cushions for combat. Below them, inspection hatches give access to install or modify accessories on the sides. A sink is placed on the side of the boat for easy access to fresh water or for storing weights or fishing hooks. Inspection procedures provide access to the hand shower and to the motor cables.

On the opposite side, a setup similar to the right side is present. The only difference lies in the high pressure hose, for cleaning the deck and a larger inspection panel to easily access the various pumps in case of emergency.

An aft deck is supplied as standard on the left side of the boat. The reason why only one is installed, is given by the fact that several fishermen prefer an auxiliary motor installed on the transom.

Under the platform a retractable ladder with integrated LED light (for squid fishing or simple position light) complete the look of this boat.

Length All Out: 6,57 m
Max Beam (inflated): 2,48 m
Deck Length: 5,60 m
Beam: 1,41 m
Tubes Diameter: 55 cm
Tubes Pressure: 0,30 atm
Dry Weight: 650 Kg
Air Compartments: n°6
Max People on Board: n°16
Max Engine Power: 165 Kw (225 HP)
Motor Shaft Length: XL x1
Hull Construction Material: Fiberglass
Self Draining: Yes
Storage Spaces: n°6
Project Category: B
Trailerable: Inflated